Commercial Gas-Fired Water Heater – Power Vent – Light Duty – 75 U.S. Gal.

This gas-fired power vent water heater is ideally suited for most light-duty commercial applications. It features a 75 U.S. gallon capacity, runs on natural or propane gas and an input rating of 76,000 BTUs. For natural or propane gas.

Documentation

Additional information

Water heater

Commercial – Gas-Fired

Model

UG75-PV

Type of gas

Natural, Propane

Storage Capacity (U.S. Gal.)

75

Storage Capacity (Litres)

284

Storage Capacity (Imp. Gal.)

63

Input (BTUs)

76,000

Warranty*

6 years
on inner tank


1 year
on component parts

*From the date of installation. For more specific warranty details including exceptions, consult the owner’s manual. Certain conditions apply.

Benefits

INTELLI-VENT™ GAS CONTROL VALVE
A state-of-the-art tamper resistant and self-diagnosing electronic gas control valve is installed for more precise water temperature control and easy troubleshooting.
Integrated ON/OFF switch
Detailed fault history
Protective PVC tubing over the ignition wires
Serviceable single circuit board
Anti-stacking algorithm
Brass flange

SILICON NITRIDE IGNITER
Improves efficiency by eliminating the energy used by a standing pilot. The operating life of the igniter is extended using the gas control’s Intelli-Vent™ technology.

HIGH EFFICIENCY BURNER
Environmentally friendly. More efficient combustion resulting in a reduction of air pollution. Both propane and natural gas are supplied with a stainless steel burner with increased durability.

FLAMMABLE VAPOR SENSOR
To increase the safety level of your water heater, we have decided to add a flammable vapor (FV) sensor. It offers a protective control system that disables the water heater in the presence of flammable vapor accumulation.

INSULATION
A thick uniform blanket of GREENFOAM® eco-friendly insulation keeps the water hotter for longer periods, reduces stand-by losses and energy costs. GREENFOAM® contains no HCFC’S (hydrochlorofluorocarbons), CFC’S (chlorofluorocarbons) nor VOC’s (volatile organic compounds).

GLASS-LINED INNER TANK
A uniquely formulated blue cobalt glass enriched with zircon is fused to specially treated steel at 1,600°F (871°C) to provide the best coating available against corrosion for many years. The tank is certified at a test pressure of 300 PSI (2,068 kPa) and a working pressure of 150 PSI (1,034 kPa).

SIDE TAPPINGS
Provide a wider range of installation options.

SIDE TAPPINGS
Provide a wider range of installation options.

FACTORY INSTALLED 3/4" NPT DI-ELECTRIC NIPPLE
Extend the life of the water heater by providing excellent corrosion protection.

IMPROVED VENTING FLEXIBILITY
Exhaust vent pipe maximum equivalent length:
- Up to 50 ft. (3 in. / 7.6 cm)
- Up to 180 ft. (4 in. / 10.2 cm)
Single model approved for installation up to 7,800 ft. (2,377 m) of altitude.

NEW POWERFUL BLOWER
More powerful and quieter, the new plastic blower is now equipped with an integrated damper. No chimney required, simply vent through the roof or an exterior wall. For ease of installation, the power venter is equipped with a ten (10) foot (3 m) electrical cord. In the event of an overtemperature condition, the high limit switch will disengage the power from the system.

FACTORY INSTALLED T&P RELIEF VALVE
Protects the tank from the damaging effects of excessive temperature and pressure.

DUAL HIGH QUALITY MAGNESIUM ANODES
Provide excellent protection against the corrosive effects of water and extend tank life.

NEW BAFFLE
New baffle design improves heat transfer.

DRAIN VALVE
Excellent quality one-piece brass drain valve is installed for easy drainage.

Search a water heater